Kajaria Ceramics sold 31.81 million square metres of tiles in Q2 FY27, up 10% year-on-year, while tile revenue rose about 23% to ₹1,290.75 crore. The difference points to a higher average realisation per square metre. How much of it came from price increases and how much from product mix is not disclosed.
Working Out the Realisation
Kajaria does not publish a realisation figure, but the investor update dated 24 October 2026 gives both halves of the calculation. Tile revenue across own manufacturing (₹694.20 crore), subsidiaries (₹268.05 crore) and outsourcing (₹328.50 crore) came to ₹1,290.75 crore, against ₹1,051.45 crore in Q2 FY26. Volume went from 28.87 MSM to 31.81 MSM.
That works out to roughly ₹406 a square metre against ₹364 — about 11% higher. Own-manufactured tiles alone work out to about ₹408 a square metre against ₹370.
This is a derived calculation, not a figure Kajaria reports. Realisation per square metre moves with product mix as well as list price: a shift towards larger formats or higher-value glazed vitrified product lifts the average without anyone raising a price. What the company itself says, in Chairman Ashok Kajaria’s message, is that consolidated revenue growth was “supported by healthy volumes and the market’s positive response to price hikes.” It does not quantify the hikes or separate the two effects.
Consolidated revenue for the quarter was ₹1,468.26 crore, up 24%. EBITDA was ₹286.50 crore, up 35%, with the margin at 19.51% against 17.94% — 157 basis points of expansion. Profit after tax was ₹189.52 crore, up 43%.
Where the Expansion Money Is Going
Three projects have been considered by the board at separate meetings, with estimated costs totalling about ₹554 crore.
Srikalahasti, Andhra Pradesh. The board considered a 10 MSM glazed vitrified brownfield expansion at an estimated ₹210 crore on 30 April 2026. The proposed capacity has since been raised to 12.50 MSM and the estimated cost revised to ₹340 crore. Kajaria attributes the increase primarily to the higher production capacity, a bigger shed for future expansion and a new warehouse. The project is expected to be completed by June 2027.
Gailpur, Rajasthan. The board considered an 11 MSM glazed vitrified expansion at an estimated ₹165 crore on 31 July 2026. The cost has risen to ₹180 crore, which the company attributes mainly to higher civil costs and a bigger warehouse. The capacity is unchanged. Completion is expected by April 2027.
Durgapur, West Bengal. At its meeting on 24 October 2026, the board considered a new tile adhesive plant with capacity of 9,000 MT a month at an approximate cost of ₹34 crore. Completion is expected by December 2027.
The two tile projects would add 23.5 MSM of glazed vitrified capacity against a current installed base of 82.70 MSM, excluding the 5.10 MSM Nepal joint venture — an addition of about 28%. Both are expected to be completed roughly two months apart, in April and June 2027.
Adhesives Grew Fastest
Adhesive revenue was ₹53.92 crore in Q2 FY27 against ₹32.17 crore a year earlier — up about 68%, the fastest growth of any line Kajaria reports. Sanitaryware and faucets together moved from ₹102.39 crore to ₹123.59 crore, up about 21%.
Durgapur would be the third dedicated adhesive plant, not the first. Gailpur already runs 9,000 MT a month, and a second 9,000 MT a month facility at Erode, Tamil Nadu, built through wholly owned subsidiary Kajaria Adhesive Private Limited, has been operational since May 2026. Durgapur would take the total from 18,000 to 27,000 MT a month, a 50% increase, in identical modules placed in Rajasthan, Tamil Nadu and now West Bengal. The company has not stated which markets the Durgapur plant is intended to serve; the geography speaks for itself, but that is an inference, not a disclosure.
Tile Subsidiaries at Optimum; Sanitaryware Utilisation Lower
Kajaria reported that its tile subsidiaries — Kajaria Vitrified, Kajaria Infinity, South Asian Ceramics and Kajaria Surfaces — operated at optimum capacity during the quarter. The Nepal joint venture ran at 85%. The update does not provide comparable utilisation figures for Kajaria’s standalone tile plants at Gailpur, Sikandrabad and Srikalahasti.
Bathware is a different picture. Kajaria Sanitaryware ran at 54% of its 7.50 lakh pieces a year, and Kerovit Global at 42% of its 4.50 lakh pieces. Faucets, made at Gailpur, ran at optimum capacity.
One line in the subsidiary disclosures is easy to miss: Kajaria Infinity’s annual capacity is now stated at 3.00 MSM, reduced from 5.70 MSM. The company gives no reason. It operated at optimum capacity on the lower base.
Elsewhere in the group, Kajaria completed the ₹50 crore acquisition of the 15% compulsorily convertible preference shares in Kajaria Bathware held by Aravali Investment Holdings, Mauritius, a wholly owned subsidiary of WestBridge Crossover Fund, LLC. The buyout was approved on 30 April 2026 and closed during Q2 FY27. Kajaria has also closed down the UK venture of its wholly owned subsidiary Kajaria International FZCO; the UAE venture continues.
Exports Still a Problem
The chairman’s message identifies two pressures on exports: demand in H1 FY27 “remained subdued,” alongside “elevated freight rates and limited container availability continuing to pose challenges for manufacturers in Morbi.”
The statement points to both a demand challenge and a shipping challenge, and does not quantify the contribution of either. It is a manufacturer with three of its own plants in Morbi describing the conditions its own cluster is working under.
What This Means for the Trade
For dealers who have spent recent quarters handling customer resistance to tile price increases, the figures are worth watching. Kajaria’s calculated realisation rose about 11% while tile sales volume increased 10%. The company says the market responded positively to price hikes, but the realisation figure also reflects product mix, and the disclosure does not quantify either effect. The quarter shows that higher realisation and higher volume can occur together; it does not establish how much volume would have grown without the price increases.
On capacity, the useful dates are April and June 2027. That is when 23.5 MSM of glazed vitrified capacity is expected to be completed, a roughly 28% addition to Kajaria’s installed base. Nothing about this changes availability or pricing this season; it is a 2027 planning input, not a 2026 one.
On adhesives, 68% revenue growth and a proposed 50% capacity addition say the category is being funded, not just carried. Dealers who treat adhesive as an accessory line to the tile sale should note that the manufacturer does not appear to.
And the sanitaryware utilisation figures — 54% and 42% — sit well below the tile subsidiaries’ reported optimum-capacity levels. The investor update does not explain the difference.