A customer stands in a branded showroom on a Saturday afternoon, taken with a particular marble-effect slab. She photographs it, and asks about availability, sizes, and what it would cost for a living room and a passage.
On Monday she is back, and the conversation has changed. Two shops down she has found something that looks very close to it. Not identical, but close enough that she cannot see the difference standing up, and the price is materially lower. She is not being difficult. She is asking a reasonable question, which is why she should pay more for what looks to her like the same floor.
Every salesperson in this industry has lived that afternoon. What is worth asking is why it became so easy.
The answer is a machine, and it arrived years ago
Digital inkjet decoration changed how a tile gets its appearance. Inkjet printers deposit ceramic inks onto the prepared tile surface, generally over a previously applied glaze layer, before the tile is fired. It largely displaced screen and roller decoration, where changing a design meant preparing new screens or rollers. With inkjet, a change of pattern is a change of artwork.
The distinction matters and it is worth being exact about: inkjet decorates the surface. It does not print into the body of the tile. That is the same distinction our guide to what a vitrified tile actually is turns on, and it is the reason two tiles can look alike and be built differently.
What digital decoration removed was the need for new screens or rollers at every design change. A new pattern no longer means new screens. It does not follow that designs became costless to copy, and it would be wrong to say so. Nobody is handed a competitor’s design file. Imitation still means photographing or scanning, recreating the artwork, running production trials and matching colour through firing.
The accurate claim is narrower, and it is enough: digital decoration made design variation and imitation easier to execute.
Hold on to a three-way distinction here, because everything that follows depends on it. Making a similar-looking design, reproducing the same surface, and manufacturing a tile with the same technical characteristics are three different achievements. They are routinely treated at a showroom counter as though they were one.
What that did to exclusivity
The mechanism is straightforward once it is set out.
Because introducing a variation is cheaper than it was, a manufacturer who sees a visual concept selling can respond to it. Not instantly, and not without cost, but considerably faster than when every new design meant new tooling. The buyer standing in front of the shelf consequently faces similar-looking choices at different prices.
Which means a manufacturer has to defend its price through something other than the design itself.
That is not the same as saying design has stopped mattering, and it would be a serious misreading to take it that way. A differentiated design is frequently the reason a customer walks into one showroom rather than another, picks up one sample rather than another, and starts the conversation at all. Design still does the work of attracting. What has weakened is design’s ability to hold a premium once similar-looking alternatives are available at a lower price. Those are different jobs, and the second one has got harder.
This is where the three-way distinction earns its keep. What the customer compared on Monday was appearance, because appearance is what a showroom sample and a phone photograph transmit. A similar appearance is not the same surface. Neither one establishes the same technical characteristics: the same body composition, the same water absorption, the same abrasion resistance, the same dimensional tolerance, the same consistency from one production batch to the next.
None of that is visible. Not to the customer, and in many cases not to the salesperson either, unless somebody reads the declared specification.
That asymmetry is the whole of the salesperson’s problem. Appearance can be compared in a second, across a shop floor, from a photograph on a phone. Everything that might justify the difference in price requires a specification sheet, a test report, or enough experience with both suppliers to know how their product behaves on site. One side of the comparison is instant and free. The other takes work, and the customer did not come in planning to do any.
There is a third tier below both, and it decides whether anybody ends up satisfied. Some of what separates two tiles cannot be established in a showroom at all, with or without a specification sheet. Whether the second order matches the first, whether the shade grading on the box holds up when the boxes are opened, whether the supplier is still answering in three years: these become evident after installation, after a repeat order, after something has gone wrong. They are the attributes most worth paying for and the hardest to demonstrate at the counter.
Worth saying plainly, because this argument is easy to turn into an accusation it is not: this is not a point about Morbi, and it is not a claim that cluster manufacturers copy while branded manufacturers originate. Digital decoration changed the competitive environment for everybody in the industry. Branded manufacturers respond to each other’s designs as readily as anyone else does. The question is not who imitates. It is what a manufacturer can still charge for once the visible part is imitable.
So what can be defended?
The attributes a design file cannot reproduce. There are four worth knowing cold:
- Consistency across repeat orders. Whether the lot delivered in eight months matches the one laid today.
- Availability of matching products over time. Whether the collection still exists when a floor is extended, and whether the companion sizes and trims are still made.
- Reliable shade and calibre classification. Whether what is written on the box can be trusted when the boxes are opened on site.
- Technical support and recourse. Who answers when a floor fails, and what the written commitment actually covers.
Our piece on what the brand premium actually buys works through what a manufacturer has to do to justify a price difference, and this is not the place to re-argue it. The point here is narrower: every item on that list is invisible at the moment of comparison, and every one of them is a manufacturing and service question rather than a design question.
What modern manufacturing investment actually looks like
The difference between making a tile and making it consistently at scale becomes clearer in where the money goes. Simpolo’s announcement of 30 September described its two new plants in unusual detail.
At Maliya and Naidupeta, the disclosed equipment includes two SACMI Continua+ PCR 2180 presses and continuous modular milling rated at 1,200 tonnes a day at the first site, and a 296-metre roller kiln with a polishing line carrying 74 polishing heads and 36 nano heads at the second. Automated packing is rated at 43,000 square metres a day at Maliya and 22,000 at Naidupeta.
For anyone who does not read machinery lists for a living: milling prepares the raw material, presses shape the tile, the kiln controls firing, the polishing line sets what finishes are possible, and automated packing handles output at volume.
An important qualification. These figures describe the infrastructure and rated capability the company has disclosed. They do not establish actual daily output, utilisation, or the quality consistency achieved in practice. Expensive machinery does not automatically produce better tiles, and it is worth remembering that a small plant can make excellent product while a large one can have quality problems.
But notice what the list consists of. Throughput, material handling, firing control, finishing capability, packing at scale. It is capital spent on making the same thing repeatedly, at scale. That is the manufacturing capability behind the consistency a premium is expected to deliver – visible in the factory, and only ever experienced on somebody’s floor.
Automation and the question nobody has answered
The automation worth examining in a tile plant is automated visual inspection, defect classification and process optimisation – considerably more relevant to how a manufacturer operates than the publicised idea of using AI to generate surface patterns. Worth keeping the labels straight: much of this runs on conventional machine vision and algorithms rather than on anything that would be called artificial intelligence.
Two questions follow, and they are not the same.
Can automated inspection identify and classify shade variation more accurately than conventional sorting? And can process monitoring reduce the variation that occurs during production in the first place?
The second is the one that matters commercially. A dealer gains little from the factory knowing that two batches differ. What he needs is the second batch to match the first. Sorting classifies variation after it happens. Process control is what would reduce it.
We are not going to answer either, because we do not have the evidence. What would settle them is measurable: a manufacturer demonstrating improved shade consistency across comparable production batches, with the baseline, the measurement method and the operating conditions stated. Until that is published, these stay open questions rather than claims.
What is left to sell
Back to the salesperson on Monday afternoon, facing a customer with a photograph on her phone.
The honest answer is not that the other tile is inferior, which he does not know, and not that it is equivalent, which he also does not know. It is that what she compared is appearance, and appearance is the part of a tile that technology has made easiest to approach. Whether the rest matches is not something either of them can see from a sample.
The same digital decoration that made this industry faster and more responsive also made its most visible asset easier to imitate. What remains genuinely difficult is unglamorous: delivering the same shade again, making the next order match the first, and having someone accountable when something goes wrong.
It makes for a poor showroom story. But when a customer asks why one tile costs more than another that looks almost the same, the answer cannot rest on appearance. It has to rest on what the manufacturer can deliver after the sale.
