CeramicPost
Intelligence for the tile & ceramic trade · India
Sept 2026
Latest:
Berger Flags Calibrated Price Increases as Standalone Q2 Profit Falls 7.3%·Somany Q2 FY27: Revenue Up 25.6%, EBITDA Up 86% to ₹99.72 Crore·Asian Paints Announces Another Round of Staggered Price Increases as Q2 Margin Falls 202 bps·Pidilite Q2: Sales Up 21.7%, EBITDA Up 0.5% as Material Costs Jump 40.7%·UltraTech Q2: Grey Cement Volumes Up 13.8%, September Trade Prices Exited 3% Above Q1 Average·Kajaria Q2: Volume Up 10%, Tile Revenue Up 23% — Realisation Up About 11%·Cement: A ₹10–15 Increase Was Forecast From 12 October. Has It Landed?·Simpolo Commits ₹1,150 Crore Across Gujarat and Andhra Plants·Cement Up ₹7 a Bag in September, More Hikes Possible in October — But the Channel Had Other Ideas·Morbi Supply Returns as Kajaria Targets H2 Recovery: Is the Price Gap Reopening?·Berger Flags Calibrated Price Increases as Standalone Q2 Profit Falls 7.3%·Somany Q2 FY27: Revenue Up 25.6%, EBITDA Up 86% to ₹99.72 Crore·Asian Paints Announces Another Round of Staggered Price Increases as Q2 Margin Falls 202 bps·Pidilite Q2: Sales Up 21.7%, EBITDA Up 0.5% as Material Costs Jump 40.7%·UltraTech Q2: Grey Cement Volumes Up 13.8%, September Trade Prices Exited 3% Above Q1 Average·Kajaria Q2: Volume Up 10%, Tile Revenue Up 23% — Realisation Up About 11%·Cement: A ₹10–15 Increase Was Forecast From 12 October. Has It Landed?·Simpolo Commits ₹1,150 Crore Across Gujarat and Andhra Plants·Cement Up ₹7 a Bag in September, More Hikes Possible in October — But the Channel Had Other Ideas·Morbi Supply Returns as Kajaria Targets H2 Recovery: Is the Price Gap Reopening?
Dealer Management

Fewer Tiles on the Wall, More Products to Sell: The Changing Economics of Tile Showrooms

By CeramicPost Editorial Team · 8 min read · November 9, 2026 Distributors & DealersTiles & Ceramics

A dealer with twelve hundred square feet of showroom floor is selling from a catalogue that runs to several thousand designs. He cannot display what he sells. Very few in this trade can. A tile showroom is always a selection of what the dealer thinks will move, which makes it also a decision about what the customer will never see.

That has always been true. What has changed is the cost of getting the decision wrong, and the question is usually asked the wrong way round. It gets framed as whether showrooms are becoming more modern, which is a question about interiors. The useful version is about capital: should the next rupee go into carrying more product, or into explaining the product better? Those pull in different directions, and most dealers cannot afford both.

How the counter has always worked

The traditional showroom is organised around availability and variety. The dealer puts up as many designs, sizes, finishes and brands as the walls will hold. A customer walks in with a requirement, the salesperson shows what is available, the customer compares samples, prices and delivery get discussed, and an order gets placed or does not.

This model is not broken and it is not obsolete. For a customer who already knows what he wants, who is building to a budget, or who is buying for a rented property, it is the fastest route to a purchase. A great deal of tile in India is sold exactly this way and will continue to be.

Its limitation is specific. A sample does not communicate a floor. A 300 by 300 piece of a marble-effect design, held at chest height under a tube light, says very little about how it will read across sixty square metres with the customer’s own furniture in it. Some buyers can make that jump. Many cannot, and they know it, which is why they go home to think and come back with photographs from three other shops.

From showing tiles to showing rooms

One response, where dealers have the space for it, is to display products in context instead of in isolation. A complete bathroom with floor, wall and coordinated surfaces. A living room with large-format flooring laid across a real area. A kitchen with wall tile, floor and a counter together. A terrace section with the anti-skid range underfoot rather than on a board.

The change this produces is in the question the customer asks. Instead of asking which tile she likes, she starts asking whether her bathroom can look like the one in front of her. That is a different conversation, and a more useful one, because it moves the discussion from preference to application.

It is also a conversation the salesperson has to be able to hold. A room setting raises questions about combinations, grout, lighting, what happens at the threshold. A display that provokes questions nobody at the counter can answer is worse than a sample board.

Large formats broke the sample board

Bigger formats made the display problem harder in a way that is not a matter of taste. A small sample cannot carry a slab. A customer choosing a marble-look porcelain slab wants to see the veining run, whether two pieces will bookmatch, and how the finish behaves under different light. None of that survives being cut to sample size.

So the display has to be close to full size, and that is expensive in exactly the ways dealers feel most: floor space, handling, breakage, and the awkward fact that a damaged display piece is a damaged full slab. We have written before about the dealer economics of slabs, and display cost is a real line in that calculation.

Which forces a choice the dealer cannot avoid. Some products earn a prominent physical display. Most will not get one. Deciding which is which is now a commercial skill rather than a merchandising afterthought.

The catalogue is wider than the floor

A single manufacturer’s range can run to thousands of designs. A showroom wall cannot expand to match it. So there is a gap between what a dealer can offer and what he can physically put in front of a customer, and that gap has to be handled somehow.

In practice it already is, informally. A salesperson pulls up photographs on his phone. A shortlist goes to the customer on WhatsApp so she can show her husband or her architect. A manufacturer’s brochure comes out of a drawer for the collections that are not on the wall. Almost all of it happens without anybody calling it a system.

What is worth putting plainly is the cost of that handover. A product presented is not a product shown. Colour, texture, the feel of a lappato against a matt finish, how a surface reads at an angle – these are the reasons a customer came to a showroom at all. A wider presented range is a real commercial gain, and it is also a quiet shift in what the showroom is for. The two come together, not separately.

What this actually costs the dealer

None of this requires a ten-thousand-square-foot experience centre. The pressure most dealers feel is about using the space and money they already have differently.

What the showroom has always doneWhat some dealers are now adding to it
Display as many designs as the walls allowCurate part of the floor around what local customers actually buy
Individual samplesA small number of complete room settings alongside them
The customer imagines the finished floorThe showroom shows at least part of it for selected products
The salesperson explains every productThe customer explores more, and asks harder questions

Four consequences follow, and they are uneven in how much they matter.

Display capital competes with inventory capital. This is the real one. A dealer with limited working capital has to choose between stock that can be delivered tomorrow and a display that might sell a better product next month. There is no universal answer, and anybody offering one is not running a shop. Fast-moving SKUs and local demand still decide the first call.

The salesperson’s job widens. Specifications and prices are no longer the whole of it. Combinations, applications and finishes become part of what has to be known at the counter.

For some customers the showroom is a shortlisting stop rather than the place the purchase happens. She visits, narrows down, takes a quotation and decides later with family or an architect. That makes capturing the enquiry and following it up more important than it used to be. A visit that ends with the customer walking out holding only photographs leaves the dealer with an enquiry to follow up, not a sale to count.

Manufacturers get another lever inside the channel. Display systems, room settings, sample support and local marketing are competition too, and they attach the dealer more tightly to whoever pays for them. That is the same territory as what the brand premium buys, seen from the dealer’s side of the counter rather than the customer’s.

None of this replaces having the tile

A well-built showroom cannot rescue poor availability. If a customer selects a design and the dealer cannot supply the quantity, the shade, the calibre or the date, the display has sold the product for somebody else.

Physical stock still decides fast-moving lines, urgent requirements, replacement orders, project deadlines, shade and calibre consistency, and whether a delivery commitment can be made at all. For most dealers that remains the business, and the display sits on top of it.

So the direction is not stock or display. It is a sharper split between the two: inventory held because fulfilment depends on it, display built because a decision depends on it.

Fewer products on the wall, a wider range on offer

If there is a model forming, it looks something like this. A tightly selected set of physical samples, chosen for what sells locally rather than for breadth. One or two room settings good enough to be believed. A dedicated arrangement for large formats, because nothing else works for them. And an orderly way to present the rest of the catalogue, with a record of what the customer shortlisted so the follow-up is possible.

That is a possibility, not a proven outcome. Plenty of successful showrooms in this country look nothing like it and are not about to change. But it is the first version that takes the actual constraint seriously, which is that the catalogue outgrew the wall some time ago and is not coming back.

The temptation is to call this modern showrooms replacing traditional ones. That framing is too easy and mostly wrong. What dealers are doing is balancing three things that each want the same money: the experience that helps a customer decide, the stock that lets a sale be fulfilled, and the ability to present a range far larger than any floor can hold. Most of the trade is doing it by instinct, one display at a time, with no way of knowing whether the last decision paid for itself.

That is the real business problem, and it is worth more discussion than another round of showroom photographs.

Have a view on this article?

CeramicPost publishes selected responses from professionals working in the tile and building materials trade.

CeramicPost welcomes responses from trade professionals. Selected responses are published below the article with your name, designation, and company. We will email you a link to verify your address before anything is reviewed, so please use an address you can receive mail at.

0 / 1500
You will receive a verification email. Your response is reviewed before publication. See our privacy policy.
Continue reading
Previous article
Market Intelligence
The Tile Export Premium Held. Both Headline Numbers Make It Look Bigger Than It Is.
7 min read · Nov 17, 2026
Next article
Industry Trends
Digital Printing Changed Tile Design. It Also Changed Competition.
8 min read · Nov 3, 2026
Free resources